Irmo73's Build

[Crawdad]

I drove mine all weekend and it was awesome!!
night and day braking compared to before
handles much, much better
dropped it off this morning because the rear discs dragged badly all of a sudden saturday and then went back to normal.. i think the hydroboost is putting too much pressure on the master cylinder.. hopefully only a minor adjustment
still leaning after driving so we will need to work that out
also.. no power to the satellite radio??
oh yeah, have to lengthen the front drive shaft with the higher lift
little things (i hope)

Sounds like ur brakes need need adjusting. Sounds like the rears still think they are drum brakes. Chuck or Charles may chime in on how to address that one.
I would not worry too much about the lean. After about a 1000 miles all nuts need to be re-tourqued if I read right when installing any SL. There are some recent threads on Classic on that issue.
As far as the front d-shaft I don't really see why you would need a new longer shaft? I have 3.5" SL and mine looks fine in the front, the rear is a lil different (I have 4.5" leafs back there to compensate for the the rear bumper and tire). My rear d-shaft is pushing it but the angle is another issue I'm concerned about. I may need to add shims there down the road. If you are planning to go rock hoping then you will need both rebuilt fr & rr d-shafts.