01-24-2013, 01:35 PM
Pretty sure Staun is out of business. InnerAirlock makes the same thing, but only for 15x8/10 wheels. I believe they are adaptable, but still ~$500 for the set.
I was wanting to run tubes in the tires. The big issue I ran into, with the narrow wheel & tire, I had to dismount the tire and feed the tube on the wheel with the tire. Even with a ton of baby powder in the tire, the tube ended up getting a hole in it and not working. At that point I decided to just make the screws sealed.
If I were to look at this idea with std wheels/tires, I would use different screws and tubes.
If anyone is interested in this idea or process I am more then happy to share my setup and what I think would work better.
I was wanting to run tubes in the tires. The big issue I ran into, with the narrow wheel & tire, I had to dismount the tire and feed the tube on the wheel with the tire. Even with a ton of baby powder in the tire, the tube ended up getting a hole in it and not working. At that point I decided to just make the screws sealed.
If I were to look at this idea with std wheels/tires, I would use different screws and tubes.
If anyone is interested in this idea or process I am more then happy to share my setup and what I think would work better.
Ben...........Big Dixie Boggers........www.MudProMetalworks.com