04-23-2012, 05:24 PM
i dont understand "mount to hard top" they welded the halfcab top to the cage?
i guess you have to cut whatever is holding the top to that cage...then test fit it on your...but you look like you have a full cage, so that means you'll probably have to trim the back side of the halfcab to make it fit. as for a quick way to remove it...you're gonna have a row of bolts in the windshield and a couple in the back corners. nothing to quick about those. after all, you're gonna want it mounted good enough to drive with right?
i guess you have to cut whatever is holding the top to that cage...then test fit it on your...but you look like you have a full cage, so that means you'll probably have to trim the back side of the halfcab to make it fit. as for a quick way to remove it...you're gonna have a row of bolts in the windshield and a couple in the back corners. nothing to quick about those. after all, you're gonna want it mounted good enough to drive with right?
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.