06-25-2014, 03:44 PM
(This post was last modified: 06-25-2014, 03:49 PM by broncosbybart.)
You'd need an ammeter. Voltage is 12v regardless. Amps is the measure of current flow. If you can find out how many amps the motor is supposed to pull, wire it to the battery with a corresponding inline fuse. Drive it for a good while and see if it pops a fuse.
You can check the amperage draw with a meter if you don't exceed the meters rated amp rating. Most aren't suitable for doing this.
You can check the amperage draw with a meter if you don't exceed the meters rated amp rating. Most aren't suitable for doing this.