68 Bronco

[wepuckett]

Ok change #1,135 and even got change 1,136 before I got back on the computer. Well was looking over the 66 frame I bought to see if it had brake hardware I could raid to save me on the D44 till I could go through it completely and it looks like someone has gone through the entire thing except the new brake lines and I even have some of those in the tubs that where waitting to be installed. So I will swipe the axle and put it under the 68 and it should solve my brakes my axle and my tie rod ends problem as the tie rods on the 68 are currently heald in place by someone previous wrapping wire around so they hold in place.

As for change 1,136 well the lift that is on the 66 turns out to be a 3.5 lift from Jeff's bronco graveyard made by Deaver as I called both of them tonight and it looks to be mostly there. So that will allow me to put a lift on the 68, I was gonna put a 2.5 and 1 BL but will go with the 3.5 and stew on the BL till I get caught up on things I need to do to get the 68 on the road.

So looks like I will have plenty of wrenching to do over the next few weeks gonna wait to drop the other engine in till I get all this lift and axle stuff situated. But will get it cleaned up and repainted from lime green to ford blue. So if anyone is in the area or just wants to wrench on one I can always use the help.

William