05-06-2015, 11:50 PM
I would vouch for a set of EB axles as well. Bolt on and go!
A 31 spline locker will work as long as it is for the 2.89" or 3.06" carrier bearings. They also make a 3.25" bearing but that locker is different from the other. If memory serves right they go by an "H" case or "B" case. Can't remember which is which but they don't interchange.
A 31 spline locker will work as long as it is for the 2.89" or 3.06" carrier bearings. They also make a 3.25" bearing but that locker is different from the other. If memory serves right they go by an "H" case or "B" case. Can't remember which is which but they don't interchange.