05-19-2008, 10:28 AM
try to use a sharp point punch to chip-out the easy out...I would try a carbide bit(to redill the easy out)-gonna cost alot more than standard bits. Then I would drill out the bolts and step up each time with a little bigger bit...until you get 90% of the bolt hole...then retry the easyout or even a tap(gun tap)Chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.