Posts: 324
Threads: 32
Joined: Apr 2007
Reputation:
0
the only down side is the drop plate it can bend due to stress and it could put a hole in the front diff if you flex to hard or jump it
86broncoII with 2in of lift 31x!2.50 SUPER SWAMPER BOGGERS steeringstableizer, skyjacker ext brakelines, and james duff prerunner front bumper
Posts: 32
Threads: 7
Joined: Aug 2007
Reputation:
0
Well, unfortunately my uncommon driveshaft bit the dust. but fred from Fleet Pride down in Cola, SC helped me out with a brand new one in just a few days. However, as anyone that was at Uwharrie aready knows; i wasn't there and all b/c of a Driveshaft
Taking the mudguppy one rut at a time.
Posts: 324
Threads: 32
Joined: Apr 2007
Reputation:
0
man that sucks wat it from the chip in the driveshaft that made it fail
86broncoII with 2in of lift 31x!2.50 SUPER SWAMPER BOGGERS steeringstableizer, skyjacker ext brakelines, and james duff prerunner front bumper
Posts: 32
Threads: 7
Joined: Aug 2007
Reputation:
0
naw it wasn't the chip. it was two reasons. the first was shortly after i made the post i started hearing a chirping sound (Cardagan Joint failed), and the other end of the driveshaft was at too much of an angle and i ended up popping ujoint caps left and right. i would put a new joint in and within a couple of miles the grease would liquify and soon after pop-goes-the-weasle.
Taking the mudguppy one rut at a time.
Posts: 324
Threads: 32
Joined: Apr 2007
Reputation:
0
dang just get a regular ujoint driveshaft and you should be good becuase i just got one and i have no vibartions what so ever
86broncoII with 2in of lift 31x!2.50 SUPER SWAMPER BOGGERS steeringstableizer, skyjacker ext brakelines, and james duff prerunner front bumper