Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ParadisePWoffrd's EB
damn, looks rough
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
Haven't had much chance to repair.

Found the culprit to the body damage. Apparently the front suspension/axles it pushed to the pass side some, allowing the tire to get into everything.
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
Working to rebuild the front suspension.

Started by removing the bent truss and replacing/upgrading it and bracing the inner Cs.[Image: 2f8e8181fc0fe9de70a4a5909103981a.jpg][Image: be22c2edb41b9461867f9793ba1244b9.jpg]

Sent from my SM-G955U using Tapatalk
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
Question for those still around. How valuable is a factory frame?

I am looking at trying to get more travel, which means the frame rails are in the way. Trying to determine if I should cut the rails or build a whole new frame.
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
ParadisePWoffrD Wrote:Question for those still around. How valuable is a factory frame?

I am looking at trying to get more travel, which means the frame rails are in the way. Trying to determine if I should cut the rails or build a whole new frame.
No one is around anymore. We have a group on Facebook but it's dead too. I've seen people sell frames for under 300.

Sent from my SAMSUNG-SM-G930A using Tapatalk
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
Generally worth more with a title
Reply
Heyyyyyy!!!! People!!!
:xyxthumbs: ROCKNROLL!!
Reply
I sold my last frame for $100, If your going to cut the original its no big deal. There is a vin stamped on the top of the frame that matches your title.
You can also get new frames. I say cut and modify!!!
[SIGPIC][/SIGPIC]
Reply
broncomatt Wrote:I sold my last frame for $100, If your going to cut the original its no big deal. There is a vin stamped on the top of the frame that matches your title.
You can also get new frames. I say cut and modify!!!
Good deal. It's not worth the extra work to save $100 worth of frame. Esp since the factory susp mounts are gone anyway.
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)