Posts: 138
Threads: 17
Joined: Aug 2011
Reputation:
0
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Installed more e-track on today. Decided to put some on the tailgate. After bolting it all in with sheet metal screws, I realized i went right through the thin part of the tailgate. So now I have sheet metal screws protruding out the back of my rig. WHOOPS!
Also found my cv head was bad on my primary heavy duty rear shaft so off to the driveline shop tomorrow to snag a replacement.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
looks good Brad!
had another joint fail!!! so i swapped yokes from another 9". got both rear driveshafts back in order(1 is spare) bronco drives smooth now again. before when i get to 30mph it would vibrate badly til almost 40. thats all gone now.
also we got the "line lock" installed on the front...that should come in handy for short stops...since i dont have a E-brake...we'll see
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 3,290
Threads: 141
Joined: Dec 2007
Reputation:
0
welded some bead stiffeners to the H1 beadlocks. going to try and get the wheels painted before the rain comes.
sounds like you guys are having fun. just throw some bubble gum in those holes chuzie.
Posts: 289
Threads: 14
Joined: Apr 2008
Reputation:
0
Installed CB Radio. :beer: Created Roof leak. :banghead: Had an old CB mounted in the roof that was covered. The mount I had would not work, so I'm sure what I put back will leak, never mind the gaping hole where the top goes
cratchhe:
Joseph I.T. Guy! "Weeehooo, uh oh!"
Posts: 1,716
Threads: 99
Joined: Dec 2007
Reputation:
0
Almost got my front bumper on
68 Half cab