Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
what have you wrenched on your bronco(s) today?
Sounds like you have Dwight down there helping you out. Smile


I expect you should just be finishing up by the Nov run.
Reply
pics??
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
Spooled the rope on the winch and installed the wireless remote.

Installed warflares. Still have to trim body a bit.

Finished hooking up my led headlights.

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
Finished the fender flares.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
Good work chuzie
68 Half cab
Reply
Think I have the steering issue fixed. Been driving it just about everywhere. Put a few hundred miles on it the last couple weeks. No death wobble. Then established some clutch chatter so had to adjust the clutch. All good for now we will see
If you can't fix it with a hammer and a welder then your gonna need a new one!
Reply
So what was the fix?

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
Apparantly the nut was bottoming out on the tie rod before it would pull it far enough through the pitman arm. I added a washer on top of pitman arm and tightened it down. Ended all play
If you can't fix it with a hammer and a welder then your gonna need a new one!
Reply
Good work. Are there threads protruding beyond or even to the end of the nut? I would hate to see it come loose. Maybe a lock washer instead of a flat washer would be a safer bet obviously if you haven't done so already.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
I backed it out of the shed and walked around it and decided to go hunting instead. So I jumped in the Z and went got the 2nd buck of the year. Fillin the freezer.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Latest Bronco Driver Cameo Bronco Biff 9 3,073 05-10-2017, 11:55 PM
Last Post: snipes243
  Bronco sighting in eastern Pendleton SC Crawdad 0 1,481 01-15-2017, 10:06 AM
Last Post: Crawdad
  Bucking Bronco ParadisePWoffrD 0 850 01-18-2016, 12:18 PM
Last Post: ParadisePWoffrD
  Bronco new year resolutions wepuckett 12 2,738 01-03-2016, 11:52 AM
Last Post: Bronco Biff
  Check this bronco out snipes243 5 3,382 12-29-2015, 08:58 PM
Last Post: Bronco Biff
  Bronco Christmas snipes243 23 4,500 12-26-2015, 04:22 PM
Last Post: Bronco Biff
  Who's Charleston Bronco made my local news? Bronco Biff 0 851 10-05-2015, 08:58 AM
Last Post: Bronco Biff
  Ruff 76 I looked at today. Broncitis 20 6,120 09-05-2015, 08:49 PM
Last Post: broncosbybart
  The Bronco made the news today snipes243 8 2,078 08-24-2015, 12:45 PM
Last Post: 66Roadster
  Not a bronco but..... firefighter2134 4 1,611 07-11-2015, 10:10 PM
Last Post: firefighter2134

Forum Jump:


Users browsing this thread: 84 Guest(s)