what have you wrenched on your bronco(s) today?

[Bronco Biff]

Holley's used to have an issue with weak power valves that would fail with a backfire thru the carb and then dump gas down the carb.

[dixieboyz13]

It turned out to be something in the needle valve for the primaries. Pulled it, sprayed it with some B-12 and reinstalled. Changed the oil and she fired right up and purred like a kitten. I cant seem to catch a break though as I was on may way to work this morning and one of my calipers on the F250 seems to be hanging up. On the plus side, if I keep replacing parts at this pace, I will have a brand new truck soon.

[Broncitis]

Pulled a valve cover to see what was under them on the 5.0 i got from Bart and found Crane Roller Rockers. Sweet Now I am going to see if I can measure the lift.

Sent from my NEC-NE-201A1A using Tapatalk

[Broncitis]

Headin to Deans for some body work and such. Getting something done again. WooooHooooooo

Sent from my NEC-NE-201A1A using Tapatalk

[Broncitis]

Fabbing some repair parts for the rt rear body mount on ol Blue

Sent from my NEC-NE-201A1A using Tapatalk

[wepuckett]

If you need body mounts, when the frame this tub warner is getting cut the body mounts off it and weld them on yours.

[broncosbybart]

Going down to the garage now. Got a list a page long. Hoping to knock at least one thing off of it...

[Rev]

Wish I was closer, would love to turn some wrenches on a Bronco.

[Broncitis]

Where are you Rev? Theres always something to be done on these ol ponys

[wepuckett]

so where you from Rev, glad to see you introduce yourself to the group in the introduce yourself thread.