|
My Silver '76
|
06-07-2012, 12:27 PM
chuzie Wrote:Gee, and no one can quite figure out why he snaps joints and explodes rear ends! :thefinger: well, when you decide to quit playin a kids game(mud) and go rock crawling...ill show ya how its done:thefinger:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
06-07-2012, 12:29 PM
besides...didnt think a 4-link was a requirement for mud holes in Fla:toothy12::hysterical::hysterical::hysterical:
:popc1::thefinger:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
06-07-2012, 01:00 PM
You're right, it's not, but it sure will be nice to have when I drive my rig all the way to URE in November and hand your ass to ya. FWIW- I have a multipurpose rig - mud, rock, road. Don't hate.
Doug, sorry for the hijack but sometimes daddy chuck has to be brought back down off his soap box.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
 mokin:Roads? Where we're going, we don't need roads. ![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
Y'all are some Hijackin' MoFos.
An update on the progress: While I was in Missouri last week Chuck decided to start looking at the body mounts and begin the the Body lift/Body bushings install. He called with the bad news and this is what he found. I ordered some new floor pans from Wild Horses and they are on their way. The proverbial can of worms has been opened. :banghead: ![[Image: 08422c44.jpg]](http://i1251.photobucket.com/albums/hh556/BucknEB/08422c44.jpg) ![[Image: ef5d36d4.jpg]](http://i1251.photobucket.com/albums/hh556/BucknEB/ef5d36d4.jpg) ![[Image: 3d17084a.jpg]](http://i1251.photobucket.com/albums/hh556/BucknEB/3d17084a.jpg)
06-11-2012, 01:13 PM
Yes the can of worms is open! This will be a new truck when you're done. You've got some good help too.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
![[Image: Bannerpic.jpg]](http://i259.photobucket.com/albums/hh295/SC74Bronco/Bannerpic.jpg)
06-12-2012, 04:30 PM
I'm slowly chipping away at the parts list.
I just placed an order with BC Broncos for their EFI throttle cable, C4 Kickdown cable and 02 bungs. Damn the shipping is outrageous!
06-12-2012, 04:39 PM
The major items still needed:
Explorer Serp. conversion Flexplate Torque Converter Mini Gear Starter Fuel Lines/filter Fuel Tank filler/breather Hoses Header Gaskets Locking Header Bolts Exhaust pipe/muffler Radiator Hoses (upper and lower) 02 sensors
06-13-2012, 08:31 AM
O2 bungs can be made from spark plug nonfoulers from the HELP section at any parts house. Forgot what size. 19mm I think. Much cheaper!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
mokin:Roads? Where we're going, we don't need roads.
06-15-2012, 03:08 PM
chuzie Wrote:O2 bungs can be made from spark plug nonfoulers from the HELP section at any parts house. Forgot what size. 19mm I think. Much cheaper! A little late, but thanks for the tip. Are there any other tips you can give me before I order some more parts?
06-15-2012, 03:15 PM
We pulled the roll cage out last night, in anticipation of the floor pans being delivered on Monday.
I wasn't planning on getting to much done last night. We wrote the "to do" and "to buy" lists up on the Dry erase board, but mainly we just sat around the garage BS'n and drinking a couple beers.:beer: |
|
« Next Oldest | Next Newest »
|
