Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ford 250 inline 6
#1
Hey guys looking for a 250 inline 6 cylinder, my 170 is tired and I like the 6 cyl but i
want to gain a little more power, anybody know where one is, doesnt matter if it needs to
be rebuild, kinda would perfer it that way. thanks Dustin
Reply
#2
have you considered a 300? if your planning for the expense of a swap, the 300 would mean only doing it once as opposed to doing a 250 now and possibly considering a 300 or a v8 down the road. it does require some extra work due to the significent length issue, but i know some folks on classic have done it...
My Build Thread-
http://www.carolinabroncos.com/forums/sh...php?t=3919

You're gonna have to be more specific... 11/12/11
Reply
#3
in either case, pull-a-part sells motors cheap, and since your planning to rebuild would be a fine place to start looking...
My Build Thread-
http://www.carolinabroncos.com/forums/sh...php?t=3919

You're gonna have to be more specific... 11/12/11
Reply
#4
I have but the more I looked into it the more I would have to modifiy, a 250 will bolt in other than the oil pan issue and bellhousing, which I already have, plus the 300 is a lot heavier than a 250, none of the pull-a-parts around here have any, ive been looking for a couple of months now, might just do a 200 instead not sure at the moment
Reply
#5
don't know if you are still looking but found this

http://fordsix.com/forum/viewtopic.php?f=86&t=71902
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New 4 Point TBP cage kit on Charleston Craigslist $250--- not mine ncsubronc 2 1,681 08-12-2016, 07:37 AM
Last Post: chuzie
  ford full width 9" 3rd member blazinchuck 0 1,263 03-07-2015, 05:20 PM
Last Post: blazinchuck
  couple 351 alum intakes, ford goodies blazinchuck 7 1,699 01-10-2013, 02:43 PM
Last Post: broncosbybart

Forum Jump:


Users browsing this thread: 1 Guest(s)