Early Bronco Parts

[broncosbybart]

Got way too much stuff. Don't want to make an episode of hoarders. That auction sale thread on classic gave me chills. Plenty more than what is listed. Post up if you need something not on here. I don't have much in the way of aftermarket parts. Plenty of OEM type stuff though. Not trying to retire off this stuff, just want to get it out of here.

-STC soft doors. Missing all hardware. Only thing I have is the fabric and frames. $40 for both. Pending to BIFF

-Fiberglass door inserts. Good shape. $100 for both. They are drilled for soft doors. Would need some holes filled if you want them without holes. Not hard to do.

-Several sets of wiper arms. $10 per set.

-Plastic door panels (aftermarket black) for 68-77 doors. $20 for the pair. Pending to BIFF

-Dash/Dash parts- just about anything.

-Good running 302 with Bronco logo valve covers. $500. No issues but it will need a stock type 2v carb.

-Stock 3 spd trans $75

-Stock Flywheel. Good shape. $20

-Gas pedal linkages. $20

-Brake/Clutch pedal assemblies. $40

-Heater boxes. $50

-Dual motor aftermarket electic wiper. Almost new. Replacement for your old vacuum wipers. Pending to CLAY

-Stock later year wiper covers with interior lights. $40

-Stock radius arms $50 per set

-Almost new poly rear main tank w/sending unit and strap. SOLD

-Grey Bronco logo bucket seats (Tom's). Ok shape. Not perfect. SOLD

-Tailgate parts (no complete tailgates)

-Lift gate parts

-Hard top glass $50

-PS air vents. Several. $30 each



-Tons more. Just let me know.

[snipes243]

interested in the electric wipers for the vacuum windshield setup. Do you have a wind shield?

[broncosbybart]

No good windshield glass. I buy it new from a supplier near me. I can get you his info if you want it. I think new runs about $125 if I remember correctly.

The wiper parts are like new. Came out of the 67 I bought. I'm putting an electric wiper windshield on it and don't need these. They are like you see here:

http://www.wildhorses4x4.com/product/Electric_Wiper_Kit

[72_EB_GUY]

Do the fiberglass door inserts have any of the hardware with them for installation?

[72_EB_GUY]

Also where are you located?

[Crawdad]

Bart is about two o'clock when looking at Charlotte. For you it's no longer distance than going to Bass Pro in Concord.

[Bronco Biff]

I'll take the soft doors and door panels.......any decent dash pads?

[snipes243]

[quote=broncosbybart]No good windshield glass. I buy it new from a supplier near me. I can get you his info if you want it. I think new runs about $125 if I remember correctly.

The wiper parts are like new. Came out of the 67 I bought. I'm putting an electric wiper windshield on it and don't need these. They are like you see here:

http://www.wildhorses4x4.com/product/Electric_Wiper_Kit[/QUOTE

I will take the electric wipers was looking at that exact kit the other day.

[broncosbybart]

Door inserts have no hardware. They just attach with sheet metal screws. I don't have any metal backing plates for them. I'm located in Mint Hill, east Charlotte.

Biff, soft doors and door panels are yours. No good dash pads. Sorry.

Clay, wiper kit is yours. I also checked that tail light assembly and it works fine.

[wepuckett]

PM sent