09-16-2014, 11:51 PM
(This post was last modified: 10-01-2014, 09:51 PM by broncosbybart.)
Got way too much stuff. Don't want to make an episode of hoarders. That auction sale thread on classic gave me chills. Plenty more than what is listed. Post up if you need something not on here. I don't have much in the way of aftermarket parts. Plenty of OEM type stuff though. Not trying to retire off this stuff, just want to get it out of here.
-STC soft doors. Missing all hardware. Only thing I have is the fabric and frames. $40 for both. Pending to BIFF
-Fiberglass door inserts. Good shape. $100 for both. They are drilled for soft doors. Would need some holes filled if you want them without holes. Not hard to do.
-Several sets of wiper arms. $10 per set.
-Plastic door panels (aftermarket black) for 68-77 doors. $20 for the pair. Pending to BIFF
-Dash/Dash parts- just about anything.
-Good running 302 with Bronco logo valve covers. $500. No issues but it will need a stock type 2v carb.
-Stock 3 spd trans $75
-Stock Flywheel. Good shape. $20
-Gas pedal linkages. $20
-Brake/Clutch pedal assemblies. $40
-Heater boxes. $50
-Dual motor aftermarket electic wiper. Almost new. Replacement for your old vacuum wipers. Pending to CLAY
-Stock later year wiper covers with interior lights. $40
-Stock radius arms $50 per set
-Almost new poly rear main tank w/sending unit and strap. SOLD
-Grey Bronco logo bucket seats (Tom's). Ok shape. Not perfect. SOLD
-Tailgate parts (no complete tailgates)
-Lift gate parts
-Hard top glass $50
-PS air vents. Several. $30 each
-Tons more. Just let me know.
-STC soft doors. Missing all hardware. Only thing I have is the fabric and frames. $40 for both. Pending to BIFF
-Fiberglass door inserts. Good shape. $100 for both. They are drilled for soft doors. Would need some holes filled if you want them without holes. Not hard to do.
-Several sets of wiper arms. $10 per set.
-Plastic door panels (aftermarket black) for 68-77 doors. $20 for the pair. Pending to BIFF
-Dash/Dash parts- just about anything.
-Good running 302 with Bronco logo valve covers. $500. No issues but it will need a stock type 2v carb.
-Stock 3 spd trans $75
-Stock Flywheel. Good shape. $20
-Gas pedal linkages. $20
-Brake/Clutch pedal assemblies. $40
-Heater boxes. $50
-Dual motor aftermarket electic wiper. Almost new. Replacement for your old vacuum wipers. Pending to CLAY
-Stock later year wiper covers with interior lights. $40
-Stock radius arms $50 per set
-Almost new poly rear main tank w/sending unit and strap. SOLD
-Grey Bronco logo bucket seats (Tom's). Ok shape. Not perfect. SOLD
-Tailgate parts (no complete tailgates)
-Lift gate parts
-Hard top glass $50
-PS air vents. Several. $30 each
-Tons more. Just let me know.