Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
death wobble
#11
I'm confused now. So you have play in the PS box but everything is in spec according to WH?

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#12
what about the tie rod to pitman arm?
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#13
It's all in spec also. Unless it is just a bad end cause it has no more than 50 miles on it
If you can't fix it with a hammer and a welder then your gonna need a new one!
Reply
#14
Can u post a hd video?

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#15
It's minimal movement but the castle nut is bottomed out on the drag link. Is there supposed to be a washer of some sorts on top of the pitman arm?
If you can't fix it with a hammer and a welder then your gonna need a new one!
Reply
#16
It's one of those things how much money do I wanna throw at "stock" buy a drag link and hope it fixes it but if not buy a pitman arm and hope for best. If I end up buying both I might as well go heim joint stering to beef it up
If you can't fix it with a hammer and a welder then your gonna need a new one!
Reply
#17
firefighter2134 Wrote:It's one of those things how much money do I wanna throw at "stock" buy a drag link and hope it fixes it but if not buy a pitman arm and hope for best. If I end up buying both I might as well go heim joint stering to beef it up

If you go heims call Andy at Ironman fab. Hes build both mine and Charles setup. And they are awesome.
68 Half cab
Reply
#18
Lug Nuts?

FWIW, i used RuffStuff hiem steering links... i dig em'...
My Build Thread-
http://www.carolinabroncos.com/forums/sh...php?t=3919

You're gonna have to be more specific... 11/12/11
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)