Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Park Lights
#1
[Image: 8f9273f3da899c2bff6a846a24cc6997.jpg][Image: 8c4fbe96336c07fa0d6b0deb6379be1b.jpg][Image: 853de9644d6edfd953244097258ccfba.jpg]Finally got around to putting the lights in my grill.

Sent from my NEC-NE-201A1A using Tapatalk
Reply
#2
I used some metal that came from a Suzuki packing crate which my nephew who works at the Honda shop here had. Worked out great,
Reply
#3
Looks good Dwight
68 Half cab
Reply
#4
Bart I have found the smaller park light lenses that you wanted and will try to remember to bring them when we meet u again. They are the clear ones.
Reply
#5
Did u do the early light MOD? Hard to tell in pics

Sent from my HTC6535LVW using Tapatalk
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#6
Sounds good. Thanks Dwight!

How a about a pic or 2 in the day where we can see a bit more of what you did?

I'm curious and I think others probably are too.
Reply
#7
Yes Chuck I had ordered some clear 66-68 lenses with plans of modifying my old buckets to fit them. When i looked closer at my old buckets I decided they were not fit to use so I ordered new 66-68 lights and made u a adapter bracket to fasten the smaller housings in the original opening.I had to trim a little over a 1/4 inch off the tab in the 73 grill and drill one hole in same tab. All in all I am very satisfied with how it worked out. If anyone would like a foot of this metal I used to make adapter I have 10 or 12 foot of it and will cut them off a piece and give it to them when we have a ride or a meet. All I used to fab the brackets were a 4 1/2 in grinder with a cut off wheel and a sanding disc a flat file and a couple of drill bits. And a sharpee to draw where I wanted to cut and drill. Easy and a great result.
Reply
#8
I do need to get some orange bulbs to put in them, they came with clear. I had some orange but when i looked closer I found that they were single element. I will try to get a couple of pics in the daylight tomorrow.
Reply
#9
New pics of lights[Image: a2aa15b7d89391b08e8c3bf5a9a5be4a.jpg][Image: 5bc1fd94e217a58963f8091f8bfa956a.jpg]
They fit perfectly in the existing opening and are recessed about half the depth of the lenses.
Sent from my NEC-NE-2
01A1A using Tapatalk
Reply
#10
Those look great, ima do that same mod soon

Sent from my HTC6535LVW using Tapatalk
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  12 Volt LED rock crawling lights broncosbybart 2 1,087 11-12-2012, 12:38 PM
Last Post: broncosbybart
  DIY rock lights blazinchuck 13 6,416 02-24-2012, 02:31 PM
Last Post: blazinchuck

Forum Jump:


Users browsing this thread: 4 Guest(s)