Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
I'm confused now. So you have play in the PS box but everything is in spec according to WH?
Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
what about the tie rod to pitman arm?
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
It's all in spec also. Unless it is just a bad end cause it has no more than 50 miles on it
If you can't fix it with a hammer and a welder then your gonna need a new one!
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Can u post a hd video?
Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
It's minimal movement but the castle nut is bottomed out on the drag link. Is there supposed to be a washer of some sorts on top of the pitman arm?
If you can't fix it with a hammer and a welder then your gonna need a new one!
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
It's one of those things how much money do I wanna throw at "stock" buy a drag link and hope it fixes it but if not buy a pitman arm and hope for best. If I end up buying both I might as well go heim joint stering to beef it up
If you can't fix it with a hammer and a welder then your gonna need a new one!
Posts: 510
Threads: 25
Joined: Feb 2010
Reputation:
0
08-26-2015, 02:45 PM
(This post was last modified: 08-26-2015, 02:58 PM by scbronco.)
Lug Nuts?
FWIW, i used RuffStuff hiem steering links... i dig em'...