Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
going to get this
#11
JayT Wrote:I'll take that footage of my rig not starting at URE now please... :banghead:
sh*t, mines gonna do THAT?....lol
Eric. :rebel:
Reply
#12
I've got a 7.3 and love it! You're getting that thing at a good price, if decide against it let me know. I could always use another truck!! I'm running the Hypertech programmer in mine and can set it up for perf., towing, or economy. You know where mine is set. Adds 100 more HP and 164 more ft. lbs. of torque. I get 19-20 mpg all the time and about 13 pulling my small camper. I get about 11 pulling my 14,500 lb. 39' park model. :xyxthumbs:
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply
#13
That is a nice dually! I'd say you got a pretty good deal.
'72 TBA...
Reply
#14
He said its geared so low with the 5spd you can only go about 70 or so and the 7.3 is running high rpms. is this true? what is normal and high rpm's for the 7.3? gear vendor overdrive?
Eric. :rebel:
Reply
#15
Its been a few years since I had mine,and dont remember the rpms but w 3:73 gears and 32'' tires it would run 96 mph before the computer said STOP DAMMIT!It would also do it pulling an 853 bobcat.
Stupid hurts when it catches up, and it WILL catch up!


[SIZE="4"]Founding member of the "cheap bastards 4x4 gang''[/SIZE]
[Image: Outalne_017.gif]
Reply
#16
dang,.....that thing is so Eric!(i mean badass) hahaha
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#17
Badass Wrote:He said its geared so low with the 5spd you can only go about 70 or so and the 7.3 is running high rpms. is this true? what is normal and high rpm's for the 7.3? gear vendor overdrive?

Mine is 7.3 with 3.73's F&R Positraction and will do about 98 at around 3000 rpm. I ran 75/80 from Kings Mountain to Charleston pulling an 8400 lb. camper a few years back. My wife threatened to divorce me so I don't run like that anymore!! LOL :xyxthumbs:
Psalms 27:1
[SIGPIC][/SIGPIC]
Reply
#18
so as long as it stays under 3k on the tach? is there a place i can check my manufacturer codes to know gear ratio and rear end etc? with chevys they got a sticker you can decipher and it tells you the build specs on that particular truck. is it the same with fords?
Eric. :rebel:
Reply
#19
the owners manual might have something in there about ratios(like if you have an auto trans or manual) probably 3.73 or 4.10 would be my guess
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#20
If it hasn't been messed with, ie changed, the tag on the center section should tell you what it has. Typically the F350s run 4:09 gears.

Tim
74 Bronco Ranger halfcab w/toys: lockers f&r, wristed arm, C4, D20, hyd assist steering, 37"MTRs, warm 302. Capability, that's what I'm talkin' bout.
[Image: 2rwp56f.png]
Reply


Forum Jump:


Users browsing this thread: 19 Guest(s)