11-28-2007, 07:20 PM
SC74 Wrote:That's going to be the hard to find and expensive one! The balljoint types are a lot easier to find and usually less expensive, but don't offer enough room on the driver side tube for the arms.
Well, I found the BOM on the axle, it's 603381-5. Turns out it is a HD FF D60 that came from a 73/74 F-250 3/4 ton 2WD truck, not a 79 F-350. Not a big deal in this case, just nice to know.
So what should I be looking for exactly, an 85-91.5 Ford F-350 king pin axle vice a 78-79 F-250/350 king pin?
Source: http://www.pirate4x4.com/tech/billavista/60_front/
Failure is not an option!