04-01-2010, 12:07 AM
bucketobolts Wrote:Edelbrock Performer RPM clone by ProComp for the intake and a Demon 650 vacuum secondary. I run a HEI conversion distributor. If you don't have at least 2" of body lift you may have clearance trouble with the distributor and the hood.
According to Summit, the height of the carb kit that I'm interested in is 9" to the air cleaner flange. So I'd need 9" plus the air cleaner height. I have a small hood scoop and I'm wondering if I have enough room for it. With my engine out, it's a little tough to determine. I went under and measured from the top edge of the motor mount to the hood and it's @ 23". Does anyone have a suggestion on how to determine my exact clearance?
[SIGPIC][/SIGPIC]