02-02-2011, 06:48 PM
Today I was comparing my Bronco's height to a 2002 F250 Crewcab that I am familiar with how tall a 79 is next to it. I knew the Bronco had 34's on it when I bought it but figured they fit because they were 9.5's. My truck is almost as tall as the F250's and stock it wouldnt be, plus the 31's have 4" of room around the fender, and the front wheels are angled just a little [SIZE="4"]in[/SIZE] \---o--/ not |---o--| or as a lot of the TTBs are /---o--\.
The truck seems to have about a 2 inch lift! :upup:
The front coils are a progressive coils and the rear is exactly level to it. So my plan over the weekend it to try and fix some 35's and see if they rub, if they rub a little then I'm trimming the fenders and saving for 35's, if they rub a lot then 33's are in order.
Well of course this is unloaded(no driver.) Maybe I need to take the lift out of the passenger side so it will ride level with me in it.
cratchhe:
The truck seems to have about a 2 inch lift! :upup:
The front coils are a progressive coils and the rear is exactly level to it. So my plan over the weekend it to try and fix some 35's and see if they rub, if they rub a little then I'm trimming the fenders and saving for 35's, if they rub a lot then 33's are in order.
Well of course this is unloaded(no driver.) Maybe I need to take the lift out of the passenger side so it will ride level with me in it.
cratchhe:
Joseph I.T. Guy! "Weeehooo, uh oh!"