12-29-2011, 09:11 PM
use a standard harmonic balancer/steering wheel puller. i am pretty sure that the bolts you need to pull the balancer off with are metric. i did manage to get 5/16 coarse thread bolts to work. they need to be really long- probably about 5" or so. i was fortunate on the engine that i robbed the parts off of. it still had the heads on it and i was able to shove a plug wire in the spark plug hole of one cylinder to keep the engine from turning while removing the 15/16" headed bolt that holds the balancer on. not sure if the engine you are robbing the parts off of is complete or not, but i was charged about 140 for the serpentine setup, minus alt. i could have bought the whole engine for $200. i would have done that if the intake was still there. it was already gone.