01-03-2012, 02:51 PM
got the gt40 intake clearance issue fixed. i was able to twist and pull the 90degree fitting out that was hitting the valve cover. it turns out, it was even the right size to tap it for 1/8 NPT. so now that and the other one were swapped out for pipe plugs which gives me enough room for the valve cover.:toothy12:
got the upper mounted to check for any other issues, also cleaned up the 5.0 plate for the top.:beer:mokin:
heres some pics:xyxthumbs:
got the upper mounted to check for any other issues, also cleaned up the 5.0 plate for the top.:beer:mokin:
heres some pics:xyxthumbs:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.