01-03-2012, 07:14 PM
SC74 Wrote:You will have to trim for the TFI - or at least I did.
Also, when you set the motor in be careful of that bottom outside pulley on the pass. side. It is just a hair from hitting the cross-member.
yep, i read about both of those issues. dont wanna grind anything til i have the distributor in hand. as for the lower pulley, i hope ill be ok...im running monster motor mounts(they should be taller than stock)
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.