08-27-2012, 02:15 PM
Thanks for the props.
Yeah, heims are spaced. Threads aren't the issue, it is the heim itself. Every one that I've broken has broken around the joint itself, usually 90" from the threaded portion. The 'band' around the ball just lets go. I'd never run a 3/4" heim on anything if I had a choice. I'm going to seriously contemplate stepping up to 7/8" heims. Radius arms are 1-1/4", so I'm good there.
It was the dirty MAF issue again. Cleaned it and the truck runs like a top. I guess the brake booster could have been a culprit as well. Replaced it as I suspected that it was leaking some and causing a vacuum issue. Either way...
Tried uploading pics, but they're too big.
Yeah, heims are spaced. Threads aren't the issue, it is the heim itself. Every one that I've broken has broken around the joint itself, usually 90" from the threaded portion. The 'band' around the ball just lets go. I'd never run a 3/4" heim on anything if I had a choice. I'm going to seriously contemplate stepping up to 7/8" heims. Radius arms are 1-1/4", so I'm good there.
It was the dirty MAF issue again. Cleaned it and the truck runs like a top. I guess the brake booster could have been a culprit as well. Replaced it as I suspected that it was leaking some and causing a vacuum issue. Either way...
Tried uploading pics, but they're too big.