09-09-2012, 10:19 AM
They work the same as the stock ones do. You need to lift the arm away from the windshield, this releases the clip(that is atached to the big spring). There the same spline and diamiter so they work the same as the OE ones do. Just need to be shortened to fit and they use a much better (and larger) blade.
To remove the stock ones I will wrap a large wrench with tape and use it too pry the arm off if its realy stuck or rusty.
To remove the stock ones I will wrap a large wrench with tape and use it too pry the arm off if its realy stuck or rusty.
[SIGPIC][/SIGPIC]