12-30-2012, 03:53 PM
....make sure you insure whaterver M/C you run it matches the calipers you have particularly insuring the volume of fluid is adequate. If you try to use a M/C designed for disc front/drum rears or drum/drum you won't get the volume of fluid required to adequately operate the rear calipers.......I've seen 1/16" piston dia differences throw the balance out where an adjustable proportioning valve couldn't compensate to give correct balance or running out of "peddle" before the brakes worked when really laid into...... Vette calipers have four pistons at about 1.8" gm/ford truck calipers have one about 3.2", drum brake wheel cylinders usuual have 2 at around 1.375"......just adding just incase!!
:xyxthumbs: ROCKNROLL!!