Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Honda Timing Chain replacement
#1
This in non-bronco related but does anyone have any experience changing the timing chain on Hondas? I have an '03 Civic and '04 Pilot that will both need timing chains here in the next 13K and am considering accomplishing the job myself. Any thoughts?
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#2
I don't know how different the honda is from mitsu... but I've done the belt on an eclipse... certainly doable on your own, but took just about all weekend!
Reply
#3
Are you sure its a timing chain? I thought that engine had timing belt. If so, it takes a few hours. I think the engine had to be supported and one engine mount had to be removed to get it on as well.
Reply
#4
i think they went to chain after '01 or '02.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#5
What engine? Also, it should have a sticker under the hood saying change the timing belt (XXXXX) number of miles. If its a timing chain, they were setup to be almost maintenance free.
Reply
#6
you will need to rig a lifting device to support the cams...you DONT want to get those screwed up! i've done a few on older hondas...nothing too new though.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#7
cool. i guess i will experiment on the civic before i try the pilot.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#8
Your 03 civic(presuming its the 1.7l not the hybred) is a sohc timing belt. Besure to replace the tensioner with the belt.
The 04 pilot is a v6 (sohc too) and it is a belt also. Check the bearings in the idler pullys for the timing belt, they often need replacing.
The 4cy is not too time consuming (half a day), the v6 allow more time. Also a good time to replace water pumps and any hoses that look deteriated.
Broncomatt
[SIGPIC][/SIGPIC]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  My 1975 honda cb750 four build broncomatt 3 2,568 11-08-2012, 12:16 PM
Last Post: BucknEB
  K5 Fuel cell or replacement tank? JayT 3 1,959 03-24-2011, 09:17 AM
Last Post: JayT
  honda cb750 four broncomatt 11 3,660 03-23-2010, 11:25 AM
Last Post: medwards01
  96 Honda Accord A/C obxbronco 3 1,122 04-11-2009, 12:33 AM
Last Post: obxbronco
  Honda Pilot Hauler chuzie 4 1,320 03-28-2008, 07:56 PM
Last Post: chuzie

Forum Jump:


Users browsing this thread: 1 Guest(s)