Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
thought i might throw this out there for anyone. a guy i work with has 78 f150 with 351m. c6, engine only has 1800 miles since it was put back together. when he puts it into gear it stalls out. but if he revs engine slightly it will run fine. it is idleing fine. just when tranny is engaged. he just changed tranny fluid and filter and fuel pump and hoses. changed valve covers and gaskets. hes not running a tach so rpms are a guess. thanks
If you can't fix it with a hammer and a welder then your gonna need a new one!
Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
maybe timing needs bumping?
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 585
Threads: 50
Joined: Mar 2009
Reputation:
0
x2 on the timing or maybe a vacuum issue.
Stupid hurts when it catches up, and it WILL catch up!
[SIZE="4"]Founding member of the "cheap bastards 4x4 gang''[/SIZE]
![[Image: Outalne_017.gif]](http://www.bouncingtrucks.com/gallery/albums/userpics/10001/Outalne_017.gif)
Posts: 965
Threads: 53
Joined: Nov 2009
Reputation:
0
i will see him tomorrow and let him know. thanks
If you can't fix it with a hammer and a welder then your gonna need a new one!
