hand throttle

[partsflyin]

I did a real simple setup Chuck.

[blazinchuck]

Mine is done and looks like that, however the shifter shaft is about 5/8 OD and the ID of the throttle is 7/8, so right now I have elec. tape to make it fit tighter. Really need a slip bushing. I post some pics later. And the funky rig I made for the carb :lol:

[partsflyin]

carb setup

[partsflyin]

Mine is done and looks like that, however the shifter shaft is about 5/8 OD and the ID of the throttle is 7/8, so right now I have elec. tape to make it fit tighter. Really need a slip bushing. I post some pics later. And the funky rig I made for the carb :lol:

Yeah you can see my ghetto fab shim in the first pic.

[Ogeechee 4x4]

Something told me to search before I posted a thread asking for ideas about a hand throttle... I guess I should go ahead and install one.

[744x4]

I have a stock hand throttle plate that goes under the gas pedal for a PTO equipped EB if you want some pictures.It is allot easier than the direct to carb route.

[snipes243]

I have a stock hand throttle plate that goes under the gas pedal for a PTO equipped EB if you want some pictures.It is allot easier than the direct to carb route.

That would be awesome to see how it's done.

[blazinchuck]

:popc1:

mines disconnected right now...changing it up.

[514f100]

used an index shifter


if you need more pic pm me

[744x4]

Here are a few shots of the stock hand throttle for the EB.It mounts under the gas pedal and actually moves the pedal insted of using a carb linkage.