Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
white smoke from the exhaust??
#1
help me figure out why this is happening only on inclines???

http://www.youtube.com/watch?v=bKJp8Cw-sgw


i need to fix whatever this is before the trip to gulches on the 29th!!!!!:banghead:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#2
I know you have not lost water and the oil looks good. Odors? Temp?
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#3
That looks like white smoke to me but I was not there. If it was white and not black we can rule out the PCV valve.

Have you tried duplicating this at high rpm on a level surface both with and without a load or does it ONLY happen at an angle?
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#4
no real odors that i could tell, as for duplicating it...i never got on it while i was just driving around, the only times i hit the skinny pedal was at an incline
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#5
i removed the grommet and PCV and there was some oil residue on the grommet, but no oil in the PCV or the hose to the PCV. I havent pulled any plugs yet...might try that later tonight
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#6
We need to try and duplicate it on level ground. Check the PCV just to make sure. if you do have a head gasket leak at the rim of the cylinder and the PCV is bad, it could be pulling water directly into the cylinder and not even messing with the oil. A failed PCV usually produces black smoke but in a head gasket situation it just makes the existing leak worse by pulling more water via the negative pressure. Did you shake the PCV to see if the check vavle is free and rattles inside.

Napa sells the coolant tester for $50.00.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#7
Chuck, are you running fuel injection? Automatic or manual transmission?
Reply
#8
jdowns67 Wrote:Chuck, are you running fuel injection? Automatic or manual transmission?

91 mustang GT EFI(stock) and np435 4 speed



also, the PCV ball is free and rattles easily:banghead:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#9
I need to call you.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#10
The other thing that concerns me is that it is only happening, so far, under load. I would venture to say, smoke color aside, that a cylinder compression test may be prudent just in case you have a ring going bad. Since you dont have true dual exhaust and cant duplicate the conditions we cant really narrow to which side this may be originating so test all 8. Have you looked at the spark plugs? I have a compression tester at home if you need it but I bet you have one too.

My bets are on head gasket or ring.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Exhaust gumby93 2 1,423 04-20-2012, 05:17 PM
Last Post: JayT
  white or black broncos...lets see'em blazinchuck 12 2,156 11-17-2011, 10:01 PM
Last Post: JayT
  exhaust ideas firefighter2134 6 1,436 07-22-2010, 04:58 PM
Last Post: bucketobolts
  what exhaust and pipes should I run brewie212 4 1,263 05-04-2009, 02:32 PM
Last Post: trkbilder
  351W Exhaust Upgrade 73Bronc 9 1,593 01-14-2008, 11:57 AM
Last Post: 73Bronc

Forum Jump:


Users browsing this thread: 1 Guest(s)