Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
D60 help!
#1
can a D60 leaf sprung work for me? I found a set of D60's fron a 78 ford 250. I told the guy I would take them if they will work. The pumken looks like it has the perch cast into it on the driver side. not sure if this will work, if so...how?Chuck

need this info soon..thanks guys
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#2
Yes, my 60's are from a leaf sprung truck. I just spent a lot of time grinding off all of the old brackets. Here are some before and after grinding pics.

[Image: DSC00025.jpg]

[Image: DSC00027.jpg]

Now you gotta tell us what kind of deal you got on them!
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
#3
waiting to hear back...sounds like I could get them for $700, but the dang things are in NJ.! ouch..yahoo maps say 11.5 hrs there.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#4
I paid $950 for mine plus shipping. ABF shipping costs me about $250 for the front and rear plus both driveshafts and a PS box on one pallet.

If they have an ABF local, they won't even have to put it on the palley. ABF will take it out of their truck and put it on a pallet. It would cost more than $250 in fuel there and back!
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
#5
I shopped for 60's for a while. Same boat, couldn't find anything with in a couple hundred miles that wasn't $1500. And most of the time the $1500 axle were just pulled out from under a junker. You can buy a complete truck with the axles cheaper than you can buy just the axles. But most likely you will have to travel.
Reply
#6
they will work chuck.
East Coast Surplus & Tactical
336-674-3868
Reply
#7
BUCKETOBOLTS Wrote:You can buy a complete truck with the axles cheaper than you can buy just the axles. But most likely you will have to travel.

Good Point. I kept my eye in the IWANNA forever looking for a complete truck for sale. They're out there, I just couldn't find one for the right price. I ended my IWANNA search when I found mine on Ebay.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
#8
i looked all over the place and found a guy 10 miles from the house that had a few. the bad he knows what he has and i paid for it. but it was a complete axle. if i was going to do it again i would just save my money and buy a fully built one from say dana trak or someone. $1500 for axle. $200 for hubs.$500 for chromo shafts. plus the "$20" crap rotors and pads and junk.
bryan
66 bronco, lots of tube, 302 boat motor, 435/203/205, 10.25 rear, 60 front, 42 iroks
Reply
#9
he says he still has it, the whole truck for $700 in NJ. not sure if he would yank them for shipping yet,Chuck waiting to hear some more,Chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#10
that is a good price. you will prob get around $200 for the truck at the scrap yard.
bryan
66 bronco, lots of tube, 302 boat motor, 435/203/205, 10.25 rear, 60 front, 42 iroks
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)