Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Project "Big Country" - Front Bumper Fab
Make sure the size limits have not changed. Maybe try uploading to photobucket or other host.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
I posted in the new forum thread, but it is a jpg and reduced to 640x480 and 56 kb which is less than the limits posted. If all else fails I'll go through photobucket.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
OK, I'm posting the pics via photobucket now. Here are the ram pics...

[Image: DSC02431.jpg]

[Image: DSC02430.jpg]

[Image: DSC02428.jpg]
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
Here is a bump stop I made for the driver side. The pass side is on top of the trac bar riser.

I used existing holes on the inside of the frame and drilled/tapped two holes on the outside of the frame.

[Image: DSC02436.jpg]
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
I mounted a toolbox in the bed between the seats and fuel cell. Eventually I'll get a taller and much narrower fuel cell that won't take up so much space.

[Image: DSC02442.jpg]
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
Looks great. So I am guessing your drag link connects at the knuckle and not at the tie rod? This would explain how you have some much room on the tie rod to mount the ram where you did but I didn't see a picture that made it completely clear.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
Here are a few pics of me using a firewood pile for a ramp to measure for the bump stops.

[Image: DSC02438.jpg]

[Image: DSC02437.jpg]v
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
chuzie Wrote:Looks great. So I am guessing your drag link connects at the knuckle and not at the tie rod? This would explain how you have some much room on the tie rod to mount the ram where you did but I didn't see a picture that made it completely clear.

Yes, my drag link goes all the way to the top of the high steer arm which does allow much more space.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
I put a WH family cage bikini top on it. I had a local sew shop add some 2" velcro straps to the length of it to add some extra support. She sewed 4 straps on each side.

[Image: DSC02439.jpg]

[Image: DSC02441.jpg]
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply
looks great there man
68 Half cab
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Added some D Rings to the front bumper. Broncitis 3 1,758 07-02-2015, 10:07 PM
Last Post: blazinchuck
  Project Mall Crawler broncosbybart 11 3,509 12-23-2011, 11:21 AM
Last Post: SC74
  My 70 Sport Project..."Nothin' Fancy" ncsubronc 11 3,152 10-24-2011, 02:15 PM
Last Post: ncsubronc
  Project Snow Ball 73Bronc 99 15,922 09-29-2010, 03:28 PM
Last Post: 73Bronc
  Gen2 to Gen1 front clip conversion ONEWYR 11 5,062 05-24-2009, 09:12 PM
Last Post: supertoyota88

Forum Jump:


Users browsing this thread: 2 Guest(s)