my full width axle build 5/23/07->10/28/07

[blazinchuck]

you know, that kinda runs me mad...I told them to let me know if I would need anything else for the TRO. I told them about the year and make,model, and axle. So they called back to tell me I would need those. They were only $20 each :evil:

[bucketobolts]

Matt is the resident authority on knuckle strength and durability :lol: ...

[broncomatt]

This photo is after pressing the knuckle back on to the ball joints.
I had to use a chain to the frame to keep it on.
I now keep a spare set of knuckles preped and ready in
my trailer. I will say the heim steering lincage is the
only thing that kept the wheel from going any farther back
than it did. I even tack weld a spot on my ball joints now!
Broncomatt

[blazinchuck]

IT'S ALIVE!!!!!!! I finished making the new exhaust (super single-Chuckie style) all mandrel bent 2.5" and summit race muffler. This thing sounds BAD AZZ!!!!!!

[ELWOOD]

we need a sound link..HaHaaaa!! Got any pics of the Chuckie style?

[blazinchuck]

we need a sound link..HaHaaaa!! Got any pics of the Chuckie style?

I'll see what I can do...Chuck

[69bronco]

Great. Maybe I can come and check it out this weekend.

[krazybronco]

do you have the axles built yet

[blazinchuck]

do you have the axles built yet

I have the rear done(it just needs,disc brakes,shock mounts)
the front is still out, had to weld some stuff on it. still needs gears reinstalled,knuckles(everything on the knuckles) and all new brakes stuff up front.

here's some pics of the exhaust...(anytime Paul 8) sounds great)

[broncomatt]

Great too hear it runs again.
Did you get the rear disk in?
Are you worried the exhast will heat up the side wall of your tire?
I have a similure setup on mine(pre bent peices welded together, I'm cheap). It actuly melted my fiberglass flare where it comes out.
Broncomatt