my full width axle build 5/23/07->10/28/07

[SC74]

Robert, how room to do have between the drive knuckle C and the diff? mine seems to only have barely 6"

Chuck - There is only 6" between the back of the knuckle and the casting for the leaf spring perch (measured on the front side of the axle). I've got my Cage bracket welded aprox 4" from back of knuckle, or 6" of end of axle tube. The cage bracket is very close to the old leaf spring mount - in fact we cut some of the leaf spring mount off with a cut off wheel to get enough room to weld that side of the bracket.

HTH

[bucketobolts]

That looks like a '78-79 model D60. My '89 only has a little over 2.5" between the knuckle C and the perch casting. Really tightens things up on the drivers side.

[fdezone]

I like how you did the grill.

x2. That freaking grill looks GREAT! Don't stop brother... you're on a roll. MOTIVATE ME!

[fdezone]

Chuck, what's new bro?

[blazinchuck]

well, absolutely nothing has been going on...completely lost the drive. Gonna try to get back on it this weekend.

[berg bronco]

Spring is just around the corner! keep going.:xyxthumbs:

[johnpaulgolf]

well, absolutely nothing has been going on...completely lost the drive. Gonna try to get back on it this weekend.

Try ... try ... try ??? :banghead: :banghead: :banghead:

What did we do yesterday? ... cratchhe:


Did we or did we not start the "serp." belt conversion ... cratchhe:

I will be back over there today and give ya a swift kick in the pants and maybe that will help ... :hysterical: upergrin: :hysterical:

[chuzie]

Are you doing the explorer serp conversion?

[johnpaulgolf]

Get motivated my Bronco brother ... I wanna see it on the trail ... get that serp. off the FSB and get it going ... plan on starting on mine today!!! :bdent:


:popc1: :popc1: :popc1:

[SIZE="7"]GO CHUCK GO CHUCK GO CHUCK[/SIZE]


:chili: :chili: :chili: :chili: :chili: :chili: :chili: :chili: :chili: :chili:

[SC74]

Let's see some pics Chuck! What all have you gotten done lately?