Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
bronco gathering at river rock july 2008
I am sooooooooo tired yall can go look at the album here!!!:biggthumpup:



http://s272.photobucket.com/albums/jj189...ll%20Size/


I will chime in later maybe or tommorow!!!:notworthy:
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy:

1985 Yoda 4Runner :xyxthumbs:
Reply
Timstrk Wrote:Wait til you see what that Fine 69 did on the trails at Riverrock. Open front and tired limited slip rear did some amazing things. Forced me into several runs I normally wouldn't have even tried. Pride will tear up a lot of parts. Not this time, though. Did lose the "E"clip that holds the trans shifter linkage to the shift arm on the trans. Zip ties to get back to camp and onto the trailer. Fun ended because of a $.09 part. Next time......
Oh, and thanks for the radius arms, JohnPaul. Good show.

Tim

Tim, Thanks bro!!!:biggthumpup: I'm glad I was entertaining!!!:hysterical:

I was also very very impressed with what you did props!!!:xyxthumbs:

And one correction I am welded in the front and a suck LS in the rear...Confusedcratchhe:

Anyway...get some E-clips in your truck for next time!!!:banghead:
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy:

1985 Yoda 4Runner :xyxthumbs:
Reply
I fixed that problem before it came off the trailer this afternoon. Took the shift linkage off and drilled a hole in it. Thanks, Donny. Put a washer on the end and cotter pinned it. Works great and won't come off. I have extra cotter pins and washers. Most of the mud is off and its back in the shed. Looking forward to next time.

take care,

Tim
Reply
we made it home!!!!! one helluva weekend!!!!!! gonna eat dinner now...later,Chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
blazinchuck Wrote:we made it home!!!!! one helluva weekend!!!!!! gonna eat dinner now...later,Chuck
x2, im starving.:beer:
East Coast Surplus & Tactical
336-674-3868
Reply
welcome home. anyone broke?
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
I had a blast and glad to see the turn out...:rebel:


Here is a link to the pics I have. Some are going to be repeats of others pics. Mainly the ones of my rig. It is hard to take pics of your self wheeling...:rubeyes:

http://www.supermotors.net/clubs/fullsiz...3730/65312
Reply
chuzie Wrote:welcome home. anyone broke?

Timstrk= E-clip off auto tranny linkage :banghead:

JP= Body mount front pass side grill...had to cut my tail pipe off...clutch out of adj pretty bad could not get first or reverse :biggthumpup:

Chuck= Chromo stub shaft pass side :hysterical:

Moody= windsheild :rubeyes:

EDIT...godevil= fingernail:hysterical: :thefinger: :hysterical:

I don't know any others...Confusedcratchhe:

I did flop my itty bitty on the pass side no damage really little bent windsheild frame but not noticeable...flopped really slow but was almost an endo tools went everywhere and kinda lost my temper but no damage done...had to regain oil pressure and lost power to elec fan on rad. had about another 40-50 yards to go down alot of drop offs and off camber and had to start in gear and it also took a minute to get carb right again (carb worked awesome all weekend) then got to the bottom and had to do a pretty serious straddle to go up about 100 yards it was sick...:eek::eyecrazy:Confusedhocked::wowcb:

Oh yeah no picks from the flop since it was about 1:00am Sun. morn/ Sat night :rebel:

I could not believe some of the stuff my itty bitty did our trucks(EB's) are so badA :gunshot:

Chuck did "CARNAGE ROCK" after a first day try and then a second day test run in the Bronco by his buddy Moody than Chuck did IT!!!:notworthy:...I cannot tell yall how sick the rock is...look up some videos from "Carnage Rock" Chuck does have alot of videos so you will see soon!!!


:notworthy: Confusedmokin: :xyxthumbs:
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy:

1985 Yoda 4Runner :xyxthumbs:
Reply
Did anyone get hurt in the rollover? Saw the truck stayed tied to the trailer. Hate that that had to happen. Trucks and trailers are just things and they can be replaced and repaired, people not so much. We all heard about it but no other word came back.

Tim
Reply
Ya'll have some awesome pictures! Keep them coming. I wish we could have made it - never been to River Rock before. Looks like a great turnout with some pretty weather - what more could you ask for?
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Tidewater Bronco's Carova Beach Cleanup October 13, 2018 Bronco Biff 0 2,305 08-16-2018, 01:21 PM
Last Post: Bronco Biff
  Gulches Rock Jumper Competition broncosbybart 1 1,783 02-25-2012, 03:08 PM
Last Post: SC74
  How bout a day trip to URE?? July 16th or 23rd nhopman 25 8,430 07-18-2011, 08:58 AM
Last Post: blazinchuck
  Uwharrie 4th of July weekend 68rockcrawler 0 1,058 06-21-2010, 01:59 PM
Last Post: 68rockcrawler
  fsb's at gulches july 17th broncomania 5 1,893 06-09-2010, 11:45 AM
Last Post: Mel
  River Rock 04/17 johnpaulgolf 40 7,782 04-24-2010, 10:46 AM
Last Post: jollygrngiant
  here's some pix from River Rock blazinchuck 6 2,483 04-03-2010, 09:09 AM
Last Post: william583
  MEB East Coast Bronco Roundup June 25-26, 2010 nhopman 2 2,050 03-11-2010, 12:55 PM
Last Post: nhopman
  HRE 275 drag radial race at the rock broncomania 2 1,489 11-13-2009, 12:25 AM
Last Post: broncomania
  JP's River Rock ShakeDown johnpaulgolf 27 5,957 05-07-2009, 10:40 AM
Last Post: godevil

Forum Jump:


Users browsing this thread: 1 Guest(s)