|
Stiff front end.
|
01-30-2011, 03:32 AM
jollygrngiant Wrote:you got those pics, rollers? Take some differnt angles and we'll try to help you out the best we can. Sorry man, I didn't think twice about it today while fixing her up some. Had to put new sway bar bushings in the back. Track down a short in the brake lights, and bypassed the heater core for now. Driving her down to Matthews, GA tomorrow to my dads shop to replace the p/s pump and hoses and also the heater core. Pics will come very soon! :beer:
01-31-2011, 01:16 AM
Got some pictures this mornings, not many really. Ill take more if i can get her on a lift tomorrow. Had some trouble driving her to GA today. About halfway threw the trip doing about 75 down I-20 I looked in my review mirror and all I see is a huge cloud of smoke, I was following my dad. So we pulled to the side of the road, and the whole back of the bronco is just coated in transmission fluid. Underneath is soaked and theres not a drop left in her. Seems like the transmission is getting hot and blowing all the fluid right out of the dipstick. Filled it up, fabbed up a make shift plug so nothing can escape from the dipstick and made it to his house. Looks like she will be getting a tranny cooler tomorrow.
But heres the pictures. ![[Image: IMAGE_417.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_417.jpg) ![[Image: IMAGE_418.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_418.jpg) ![[Image: IMAGE_419.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_419.jpg) ![[Image: IMAGE_420.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_420.jpg) ![[Image: IMAGE_424.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_424.jpg) ![[Image: IMAGE_422.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_422.jpg) ![[Image: IMAGE_421.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_421.jpg) ![[Image: IMAGE_423.jpg]](http://i257.photobucket.com/albums/hh239/rollers888/IMAGE_423.jpg)
01-31-2011, 12:12 PM
Yank out that second shock! That has to be one very stiff ride, depending on their rating. Sorry about the trans... Sounds like a service on it is in order too... I'm not sure that keeping the boiling fluid in is better than letting it over flow and pulling over to cool.
01-31-2011, 03:27 PM
JayT Wrote:Yank out that second shock! That has to be one very stiff ride, depending on their rating. Sorry about the trans... Sounds like a service on it is in order too... I'm not sure that keeping the boiling fluid in is better than letting it over flow and pulling over to cool. Ill try that out. And yea i only let it stay in there until i got to my stopping point. Trans cooler will be going on sometime this week, along with the heater core and p/s pump. snipes243 Wrote:So mant comments can come the title of this thread. :xyxthumbs: |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Front axle | krazybronco | 1 | 843 |
02-20-2011, 11:44 PM Last Post: broncosbybart |
|
| RockSolid PreRunner Front Winch Bumper 92-96 | Sweat | 28 | 11,327 |
06-02-2010, 06:51 PM Last Post: jollygrngiant |
|
| gears front and rear | bone collector | 8 | 3,072 |
07-31-2009, 08:07 PM Last Post: chuzie |
|
| front sway bar | KUIKUIBRONCO | 15 | 2,743 |
04-20-2009, 11:52 PM Last Post: KUIKUIBRONCO |
|
| FSB front rotor removal | tapiot | 18 | 5,965 |
04-19-2009, 09:26 PM Last Post: bone collector |
|
| JP's New Front Bumper!!!! | SC74 | 60 | 8,714 |
12-20-2008, 11:00 PM Last Post: SC74 |
|
| front axle vent | KMIBronco | 7 | 2,552 |
08-31-2008, 12:37 PM Last Post: Timstrk |
|
| New front driveshaft | badbronco | 1 | 3,012 |
07-10-2008, 11:05 PM Last Post: johnpaulgolf |
|
| Front Page NC4x4 forum | cuz1 | 18 | 5,244 |
07-10-2008, 06:53 PM Last Post: johnpaulgolf |
|
| New Roll cage, tranny, sliders and fab front bumber | johnpaulgolf | 151 | 19,484 |
06-27-2008, 04:12 PM Last Post: johnpaulgolf |
|
