3" body lift and 2" spacers for '09 FSB

[smooth]

.....
My question to the group here is what will I need to make this work? Any extensions/additions?

.....
4. Since you are lifting the body, there are no drivetrain/braking/shock issues (edited: maybe the rear shocks, I can't remember if they are mounted to the frame or body) other then steering shaft, MAYBE the brake lines out of the master cylinder, but I doubt it, and gas filler neck. (edited: also, the fan shroud will need to be trimmed, removed, or relocated).

MoMo

An addition to #4: I did a 3" BL on a '89 F150 and the factory neg. battery cable was too short afterwards. Apparently the battery tray raised with the fender and the engine block stayed in the same location. :banghead:

That really should be it. I just installed new shocks on my Cent, the rears attached to the frame, so you should be good there. I mentioned the Brake lines out of the Master Cylinder, but I've never heard anyone mention it, so I doubt that's needed. All I've ever heard is the fan shroud, filler neck, and possibly the steering shaft. And as Jon (Ogeechee) pointed out, the negative battery cable (Good catch! :biggthumpup

MoMo