05-11-2009, 03:15 PM
I have done some, if your just going to swap out the clutches and bands its not hard at all. If your going with all new bushings and thrust washers you need to be carefull about assembly height. IF you dont get it right the first time you can burn up which ever peice has too much pressure on it.
In my case it was 2'nd gear planetary set:banghead:
When I went too school for trannys, our instructor had a few things he burned into our heads. Clean work area, watch out for the case as its very sharp, test everything with air before you put it back in the car.
Broncomatt
In my case it was 2'nd gear planetary set:banghead:
When I went too school for trannys, our instructor had a few things he burned into our heads. Clean work area, watch out for the case as its very sharp, test everything with air before you put it back in the car.
Broncomatt
[SIGPIC][/SIGPIC]