08-01-2009, 11:11 PM
So I got a new switch that goes on the brake pedal and install it tonight, then I pull the steering wheel off and the found my problem. There is fire getting to the green wire but none to the orange-black wire. I jumper a wire between them and push in the brake and I have Brake lights. So that tells me a new wire harness for the switch will be on order come Monday.
So is it the bad to change out? Looks to me if you tape the bottom and take your time by pulling it in the steering colum it should not be that bad. Then do you take and cut the old wires out of the plastic harness and then push your new one in the old harness? That seems not to hard. Post up and let me know what you have done. Any Tips will help...
So is it the bad to change out? Looks to me if you tape the bottom and take your time by pulling it in the steering colum it should not be that bad. Then do you take and cut the old wires out of the plastic harness and then push your new one in the old harness? That seems not to hard. Post up and let me know what you have done. Any Tips will help...