10-26-2010, 02:53 PM
nhopman Wrote:I run a saginaw with power steering, hydroboos brakes and an assist ram and haven't had any problems with leaking.
Had a buddy that got leaks around the reservoir and it ended up being his vent line was clogged, as the fluid heated it created pressure and eventually would start leaking.
The bolts holding the pump onto the bracket shouldn't affect the seal around the pump and the reservoir. If the pump is loose on the bracket you may need to shorten the bolts a bit since they thread into a blind hole.
Nick
Is your pump a double feed pump, Also can I just go to a parts store and get one with a warranty?
The reason the first pump died was the bolt supplied with the bc kit were much to long so as u tight them it pushed the reservoir out causing it not to leak up pour out of the bottom of the housing even when it wasnt running.
68 Half cab