10-26-2010, 08:19 PM
The thing about the pumps is that you have to know what the fitting size is on the hose and/or old pump and match it up. In other words if your existing pump and hose have 16mm threads then you would want to get a pump that also has 16mm threads on the pressure side. The other thing is that you can unscrew the output of the pump and convert it. As an example, I went to the junkyard and got like 4 pumps. I took the one in the best condition and swapped the output with one of the other pumps I had gotten to match the hose I had. I think you can go on NAPA.com or whatever and search for older Ford Vehicles and it will show you what pump and what the threads on the output is.