12-23-2010, 04:22 PM
looking awesome, love the metal work and skis...
as for the 3rd member, make sure you remove the tiny washers under each bolt. i think they are copper(cant remember), then you might be able to use a dead blow from the bottom of the pinion and from the top,HTH
as for the 3rd member, make sure you remove the tiny washers under each bolt. i think they are copper(cant remember), then you might be able to use a dead blow from the bottom of the pinion and from the top,HTH
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.