10-18-2011, 05:25 PM
Make sure you have the left and right plates mated to the correct sides of the hitch. The blind nuts on the inside the frame plates are not always exact from side to side. You could end up with two lined up and the third not quite. And front to back, also. Just so you don't have to take it all apart again and start over.
Tim
ask me how I know.
Tim
ask me how I know.
74 Bronco Ranger halfcab w/toys: lockers f&r, wristed arm, C4, D20, hyd assist steering, 37"MTRs, warm 302. Capability, that's what I'm talkin' bout.
![[Image: 2rwp56f.png]](http://i38.tinypic.com/2rwp56f.png)