04-06-2008, 12:33 AM
(This post was last modified: 04-06-2008, 12:38 AM by blazinchuck.)
here I had to shorten the latch. With the winch installed, I could not pull the handle out and open the hood
So, I raised the latch(required cutting,welding,and some paint.
Now the latch comes out higher than it used too. Totally clears the housing of the winch now. Figured I would fix this problem now, so when I get the new Warn w/air-I'll be good to go!!!
So, I raised the latch(required cutting,welding,and some paint.
Now the latch comes out higher than it used too. Totally clears the housing of the winch now. Figured I would fix this problem now, so when I get the new Warn w/air-I'll be good to go!!!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.