Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OK Chuck let's get her fixed
#11
fdezone Wrote:Broncomania, you gonna make it out to this one? I'd really like to check out that rig of yours.
wheeling ????????? i need details. always interested.
East Coast Surplus & Tactical
336-674-3868
Reply
#12
You're gonna have a good time with the Red crew. Here's about a 36 minute video of some of 'em.

http://www.smileyzone.com/videos/CrozetF...RunRaw.wmv
Failure is not an option!
Reply
#13
for some reason my pc will not let me open a lot of videos.
but thanks.
East Coast Surplus & Tactical
336-674-3868
Reply
#14
I swear!*&^%%$##@...I'm about to give up on this damn bronco! :evil: Axel, you gonna get mad if i back out of this? :wink: Nothing is working right! I still gotta install the new chromo shaft.


I even replaced both rear axle seals/bearings and the new ones are leaking!!!!!!!!! :x :x :x :x :x :x :x WTF, what do ya do if the new ones dont work??? I'm finished ranting for now,Chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#15
Unfortunatly, take it apart again is the best Idea. Sad Carefully take the seals back out and make sure they fit on the axle tightly.
Possibly the spring rolled off?
What else have you gotten done? Have you tried bleeding the brakes?
Broncomatt
[SIGPIC][/SIGPIC]
Reply
#16
blazinchuck Wrote:I'm finished ranting for now, Chuck

Yeah, quit your whining, it doesn't become you. FIX YOUR TRASH! It's a Bronco, we all have problems. I understand the holidays and all and working on a tight schedule, but if you're scared, just say you're scared. :lol: It's your reputation. Confusedhock: I'm actually gonna feel bad knowing you spent so much prep time for this run just to wheel the snot out of her, but that's the routine.

No seriously, I'd totally understand if you can't make it. Lord knows I've missed plenty of great wheeling opportunities due to my truck being deadlined. Good luck. I hope you can make it.

FWIW, I still have stock axles with 260 joints, rag joint steering, steering box is not reinforced, stock tie rod/drag link, cage still hasn't been welded to the frame, all-terrain tires, etc., etc., etc. I did manage to install a new thermostat being that my engine temp wasn't going above 150°. I have one remaining $100 Visa gift card, and I'm debating on whether to make up the difference to purchase a lower steering shaft or just get a D20 twin stick. I've spent so much money already this holiday season and I just gave my oldest daughter a couple hundred to go on a New Year's ski trip with her girlfriends. Now what were you bitching about?

I hope this pisses you off and ignites a fire under your ass! :twisted: "We" set this up, "we're" gonna make it there! :wink: Start again! It's Crozet or BUST!
Failure is not an option!
Reply
#17
Oh HELL If that didn't start a fire let me..........IF IT WAS A FULL SIZE Confusedhock: you wouldn't have this problem... :lol: Happy New Year Chuck!!!! Dean
SIZE MATTERS! :rebel: Uncle Ted [SIGPIC][/SIGPIC]
http://www.wheelindixie.com
http://www.coastalcarolinaoffroad.com
Reply
#18
it is so ON...like Donkey Kong!!! :twisted: I'm still going in Jan. Took the bronco out today-had a blast...no breakage, plenty of H.P., and mudding 8)

godevil might have something to say, he went also!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#19
here's Donnie(godevil) in his super baddazz Willys!

http://www.youtube.com/watch?v=ePZepJA9tXs
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#20
blazinchuck Wrote:It is so ON...like Donkey Kong!!! :twisted: I'm still going in Jan.

Now that's the freaking attitude! Big Grin I'll see you in 3 weeks.
Failure is not an option!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Thanks Chuck NC-Fordguy 3 1,371 02-09-2017, 09:14 PM
Last Post: blazinchuck
  ford fuel accumulator, fuel starving issue??**FIXED** blazinchuck 9 4,606 03-22-2012, 09:54 AM
Last Post: broncosbybart

Forum Jump:


Users browsing this thread: 7 Guest(s)