Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ParadisePWoffrd's EB
#51
you've come a long way with that thing! you gonna try and come out to URE for our Nov run? i'd love to see it in action.
Reply
#52
thanks for the comments guys...

I will try to make it to URE... not sure what Nov has in store for me yet... also depends if I can get the 60 in or if the 44 survives a few rides in October...
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
#53
went out and found I had no brakes thanks to the hose between master and distribution block...

Took the chance to upgrade to rear discs with adjustable proportioning valve...

For future reference I used:
- 91 Sidekick rotors (dont have to turn down shaft)
- GM Metric Caliper
- weld on caliper bracket... could have used bolt on instead...


If anyone knows of a good bolt-in manual master to upgrade to, Im interested...
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
#54
i ran manual disc using the f250 MC bigger bore/stroke...however, since your 4 wheel disc..you'll probably need. equal size front and rear reservoir . i think a corvette MC might work...dont know yrs tho
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#55
got to wheel a little this weekend. It did the few things I asked it to do, and being slick kept the front end together...

I realized 2 things in the short while:

- Need to install an electric fan (and repair my alum rad)
- Need a bigger master for quicker brakes
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
#56
Saturday I installed a new radiator and elec fan... Had to do a little clearencing to the core support to mount it as a pusher (it wouldnt clear as a puller)

I really need to get some tube work done on the front end to clean all this up..
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
#57
Tonight i installed the best upgrade yet.... yup, some tunes...
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
#58
got the new radiator and electric fan installed, along with a new core support... have to rework the front clip and winch mount too now to compensate...



ill get some pics up later
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply
#59
good dal, cant wait to see the new install pics!! tunes are always good to have lol
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#60
Here are some pics of it.

New radiator mount & brackets holding up front clip. The electric fan is under the tube as it wouldn't fit as a puller.
   


The h4 headlights hit the tube so I replaced them w/ some old hellas I had around. Also you can see how its farther forward now. So either need new winch mount or cut out grill.
   


You can really see that's its farther here. Got a few choices: stretch fender or make new mounts. Where its at now shaves ~3" off per side.
   



Heres the pics of the tunes. I put 12v charger with miniplug input & volume control. Also you can see the cold start plunger & rocker for the fan.
   
   
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)