Pitman arm bushings? and a couple other suspension ?'s

[knoxville714]

So I've got a slight lean in the rear driver side, due to the leaf spring coming undone, and was wondering if those are generic ford springs that i could maybe pull from an old F series or need to get new ones.

Also, I've got the wobble in the steering right around 40-45, and past that, the front end just starts hopping all over the road. I've been told the bushings on the pitman arm are worn, but I can't find bushings that are called "pitman bushings" anyone know if they're called something else? thanks gents

[broncomatt]

No such bushing on the pitman arm, this is a solid metal joint between the steering box and the drag link. Its more likely the drag link end (joint) has
worn out. Another common vibration in the front end is a worn track bar bushing.
As for the rear the leaf springs are specific to the bronco, any one of the bronco venders can supply them.

[broncosbybart]

As Matt said, the track bar bushings are a usual suspect.

The early Bronco leaf springs are 2.5" wide. The full size Bronco and F series stuff are 3" wide. A spring repair shop might help but I don't know that for certain. The wild horses rear springs are awesome but not cheap.

[Deltabronco]

I have a set of original Springs i dont need. Also have some new 3.5 lifted springs from JBG.